1. Every customer who uses the high quality gap equidistant embossing machine in winter can use the hair dryer to blow air when it is turned on every morning.

2 Compared with summer, winter has dry air and is a "high-incidence period" for printers. If not maintained carefully, it may cause the print head to get clogged, the print head to malfunction (commonly known as head collision), and in severe cases, the print head may even crack. Once such a fault occurs, it is fine if it is free within the warranty period, but if it is outside the warranty period, it will cost a considerable amount of money Therefore, strengthening maintenance is the only effective solution that addresses both the symptoms and the root cause!

3 Due to the cold weather, if the indoor (working environment) is relatively cold and overly dry, it is necessary to pay attention to covering the printer with a large and thick cloth when placing it in daily use, especially covering the paper inlet and outlet completely. Since the print head is inside the printer, if it can be ensured that cold air does not enter too much of the printer space, This can prevent the ink droplets on the printing nozzle from solidifying; otherwise, it is very likely to cause clogging, resulting in a decline in the printing effect.

4. It should also be noted that the printer should be turned on at least once a week. When the printer is turned on, it needs to be preheated and will automatically perform a nozzle cleaning program (usually the amount of ink consumed during startup cleaning is very small). This can remove the ink droplets originally adhering to the nozzle, avoiding clogging caused by prolonged ink droplets remaining on the nozzle. And conducting a nozzle inspection can effectively check the current usage of the nozzle to see if there are any phenomena such as missing lines in the print (usually, missing lines in the print are a manifestation of the plug).

5 In normal times, you can also open the upper cover of the printer (it must be in the off state), and you can see a relatively smooth iron rod placed horizontally in the printer. This iron rod is called the guide rod in the industry and serves as the track for the print head to run. During operation, due to the lubricating oil on the guide rod, the printing can be completed quickly and accurately. In winter, due to the cold weather, the lubricating oil is prone to solidify. Moreover, if the machine is not maintained during daily use, such as always keeping the upper cover of the printer open for work, dust and other substances will constantly invade the guide rod. Over time, in winter, abnormal phenomenon of the print car is very likely to occur. If you want to avoid this situation from happening, try to drop a few drops of essence on the guide rod. Apply tight lubricating oil and try to remove as much dirt as possible that was originally left on the guide rod.

high quality gap equidistant embossing machine https://www.zhhologram.com/Hologram-Soft-Embossing