The use of special motor brass flange lubricants will affect the degree of friction and noise in the later stage. If the lubricating oil is not used properly, it will seriously damage the special motor brass flange. Lubricating oil is so important that it must be used properly. Jiangsu SuZhixing is a professional manufacturer of special motor brass flange, take you to know what kind of lubricating oil is better for special motor brass flange.

1. Horizontal cycloidal special motor brass flange normally lubricated by the oil tank, the oil level height can be maintained in the middle of the visible oil window. When the working conditions are harsh and the ambient temperature is high, circular lubrication can be used.

2.40# or 50# oil is generally used for the lubrication of special motor brass flange of cycloidal needle teeth at room temperature. In order to improve the performance of special motor brass flange and extend the service life of cycloidal pin teeth special motor brass flange, it is recommended to use 70# or 90# extreme pressure gear oil. When working at high and low temperatures, the lubricant should also be reconsidered.

3. The vertical installation of the planetary cycloidal pin teeth special motor brass flange should prevent the oil pump from breaking, so as not to damage the special motor brass flange parts.

4. When refueling, you can open the hood on the upper part of the engine base to refuel. When discharging oil, turn the drain plug under the engine base to discharge the dirty oil. special motor brass flange comes out of the factory with no lubricating oil inside.

5. Replace the oil after 100 hours of refueling operation. (Clean the internal dirty oil) continuous work, replace once every six months (8-hour working system). If the working conditions are not good, the oil change time can be shortened appropriately. Practice has proved that frequent cleaning and oil change (e.g. 3-6 months) of special motor brass flange plays an important role in extending the service life of special motor brass flange. Lubricating oil should be replenished frequently during use.

6. The newly issued special motor brass flange is lubricated and replaced every six months. The grease is aluminum disulfide -2# or 2L-2# lithium based grease.

special motor brass flange https://www.dydzmotor.com/Brass-Flange-Swimming-Pool-Robotic-Cleaner-DC-Electric-Pump-Motor.html